본문으로 건너뛰기
AzenoriFoods

이 페이지는 아직 한국어로 번역되지 않았습니다. 영어 버전이 표시됩니다.

WHOLESALE & BUYING · 6분 분량

How Many Cartons Fit on a Pallet?

A step-by-step method for calculating cartons per pallet using pallet footprint, carton dimensions, height and weight limits, overhang and stacking strength, with a worked example.

Azenori Foods Editorial Team · 업데이트: 2026년 11월 18일

Palletised goods in a distribution warehouse

"How many cartons fit on a pallet?" is one of the most common questions from wholesale noodle buyers, and the honest answer is that it depends on the SKU. Carton sizes vary widely between packs, multipacks, cups and bowls, and between manufacturers and market versions. This guide explains how to work out cartons per pallet yourself, so that you can check supplier figures, compare quotations and plan freight. The definitive figures always come from the manufacturer's logistics data for each SKU.

The five inputs you need

  1. Pallet footprint: the length and width of the pallet.
  2. Carton dimensions: external length, width and height of the shipping case.
  3. Maximum load height: set by your warehouse racking, the truck or container, or your customer's receiving rules.
  4. Weight limits: pallet safe working load, plus vehicle, container and handling limits.
  5. Stacking strength: how much weight the bottom cartons can carry without crushing.

Pallet footprint

The common European pallet is the EPAL Euro pallet. According to EPAL, it measures 1200 × 800 × 144 mm, weighs about 25 kg and has a safe working load of 1,500 kg. EPAL also states that when loaded pallets are stacked on a solid, even surface, the bottom pallet must not carry more than 5,500 kg. Other plan sizes, such as 1200 × 1000 mm, are also used in international trade. ISO 6780 covers principal dimensions for pallets used in intercontinental handling. Confirm which pallet your supplier uses, because a different footprint gives a different result.

Step-by-step method

Step 1: Cartons per layer

Divide the pallet length and width by the carton length and width, rounding down. Then try the carton rotated 90 degrees and keep whichever orientation fits more. For cartons that do not divide evenly into the pallet, a mixed (pinwheel or block) pattern can sometimes fit more. Pallet-pattern software or the manufacturer's standard pattern will show this.

Step 2: Number of layers

Subtract the pallet's own height from the maximum load height, divide by the carton height, and round down.

Step 3: Cartons per pallet

Multiply cartons per layer by the number of layers. In North American practice this is often written as TI × HI (cases per layer × layers).

Step 4: Check the weight

Multiply cartons by carton gross weight and add the pallet's own weight. Compare the total with the pallet's safe working load and with vehicle, container and handling limits. Noodle cartons are usually light for their size, so height is often the binding limit, but always check, especially for mixed pallets that include drinks or sauces.

Step 5: Check stacking strength

The bottom carton carries the weight of every carton above it, and more if loaded pallets are stacked on top of each other. Compare that load with the carton's compression strength, using a safety margin agreed with your packaging supplier. Cups and bowls are more sensitive to crushing than packs.

Illustrative example — not a product specification

The numbers below are round, hypothetical figures chosen to show the method. They do not describe any real product.

Assumptions:

  • Pallet: EUR pallet, 1200 × 800 mm footprint, 144 mm high, about 25 kg
  • Maximum load height including pallet: 1,600 mm (hypothetical warehouse limit)
  • Carton A: 400 × 300 × 250 mm, 5 kg gross
Step Calculation Result
Layer, orientation 1 1200 ÷ 400 = 3; 800 ÷ 300 = 2.67 → 2 6 per layer
Layer, orientation 2 1200 ÷ 300 = 4; 800 ÷ 400 = 2 8 per layer
Layers (1,600 − 144) ÷ 250 = 5.8 → 5 5 layers
Cartons per pallet 8 × 5 40 cartons
Load height 144 + (5 × 250) 1,394 mm
Gross weight (40 × 5 kg) + 25 kg 225 kg
Load on bottom carton (single pallet, column stack) 4 cartons × 5 kg 20 kg

Here height is the limiting factor. The 225 kg gross weight is far below the 1,500 kg safe working load. Rotating the cartons raised the count from 6 to 8 per layer, an increase of a third, just by changing orientation.

Carton B (does not divide evenly): 420 × 310 × 250 mm.

  • Orientation 1: 1200 ÷ 420 → 2; 800 ÷ 310 → 2 = 4 per layer
  • Orientation 2: 1200 ÷ 310 → 3; 800 ÷ 420 → 1 = 3 per layer
  • Mixed pattern: four cartons in orientation 1 use 840 × 620 mm. That leaves a 360 mm strip along the 800 mm side, which takes one rotated carton (310 × 420), giving 5 per layer.

Even at 5 per layer, Carton B covers only about two-thirds of the pallet surface. This is why carton design matters for freight cost, and why two products with similar contents can have very different costs per pallet.

Overhang, underhang and stacking pattern

  • Overhang (cartons extending past the pallet edge) is generally avoided. The overhanging carton walls are unsupported, which weakens them and exposes them to damage from handling equipment and neighboring pallets.
  • Underhang (a load smaller than the pallet) is safer but wastes space, and can reduce stability if the gap is large.
  • Column stacking (cartons directly above each other) keeps carton corners aligned and helps preserve compression strength.
  • Interlocked stacking (alternating layer patterns) improves stability but can reduce compression strength, because corners no longer line up.
  • Use corner boards, top sheets and stretch wrap appropriate to the load, and label each pallet clearly. GS1 logistic labels identify each pallet with an 18-digit SSCC.

From pallets to containers

The number of pallets per container depends on the container's internal dimensions and door opening, the pallet footprint and orientation, and whether pallets can be double-stacked. Some shippers floor-load cartons instead of using pallets to fit more volume, which means slower unloading. Ask your forwarder to plan the load with the actual SKU data. See full container orders and international shipping for how these options compare.

What to ask suppliers for

  • Case dimensions (L × W × H) and gross weight per SKU
  • Standard pallet pattern (cases per layer, layers, pallet type and load height)
  • Whether loaded pallets can be stacked
  • Case volume in cubic meters (some manufacturers publish this, for example on Samyang's export listing)
  • How mixed pallets are built and labeled

Format choice has a large effect on all of this. Read our guide to instant noodle packaging formats.

Next steps

Send your SKU list and preferred pallet type through our request a quote form, and we can request the manufacturer's logistics data where available. For single and mixed pallets, see pallet orders.

자주 묻는 질문

Is there a standard number of noodle cartons per pallet?

No. The number depends on each SKU's carton dimensions and weight, the pallet type, the permitted load height and the stacking pattern. Use the manufacturer's logistics data for each SKU.

What are the dimensions of a EUR pallet?

According to EPAL, the EPAL Euro pallet measures 1200 x 800 x 144 mm and weighs about 25 kg, with a safe working load of 1,500 kg.

What does TI-HI mean?

TI-HI is a common shorthand for pallet configuration: TI is the number of cases per layer and HI is the number of layers. Multiplying them gives cases per pallet.

참고 자료

  1. EPAL Euro pallet – EPAL
  2. How to create logistics labels and Serial Shipping Container Codes (SSCCs) – GS1 UK
  3. Samyang Foods – Only for Export product listing (English)

도매 견적 요청

Send one request for any mix of products, order units and destinations.

견적 요청